Having the right tools makes any job go smoother and you happier with the results. We’ve got three tools that will go a long way to doing just that.
Astro Pneumatic Tool Company ONYX TurboStep HSS Drill Bits (pictured above)
Nothing is more frustrating than drill bits that skip, always need pilot holes, or just plain don’t make holes. Astro Pneumatic Tool Company ONYX TurboStep HSS Drill Bits eliminate all of those issues. Precision ground from heat-treated M2 high speed steel, the spiral fluted, stepped tip drill bits prevent bit walk and the need for pilot holes, plus Astro Pneumatic’s ONYX oxide coated to prevent chip buildup. The bits are shorter than typical drill bits, making them stronger and less prone to breaking or shearing. Those features make the TurboStep HSS bits perfect for hard alloys, sheetmetal, and imperfect parts that are difficult to drill into.
Astro Pneumatic Tool Company ONYX TurboStep HSS Drill Bits are available in two sets:
- 21-piece set with bit sizes from 1/16″ to 3/8″
- 29-piece set with bit sizes from 1/16″ to 1/2″
Milwaukee Magnetic Spark Plug Sockets
The lowly spark plug socket hasn’t changed much since it was invented back in who-knows-when. Milwaukee Tool’s Magnetic Spark Plug Sockets bring the tool up-to-date with features like optimized geometry to reduce rounding and a rare earth magnetic retainer to keep the spark plug in place as you tighten it and smoothly release it when you’re done. Precision knurling on the outside of the socket allows for better control when hand tightening or loosening, and there is an external hex at the base of the socket for a wrench. Milwaukee Tool Magnetic Spark Plug Sockets are available for 5/8- and 13/16-inch spark plugs and use a 3/8-inch drive ratchet.
Milton Texas Twister Air Hammer Pulling Kit
Convert your air hammer into a 3,000 blows/minute pneumatic slide hammer with the Texas Twister. The conversion is simple—just snap the curved air bit into the collet of your hammer, install the bit of your choice, and hold the hammer in reverse and use your thumb to push the trigger. This Milton video shows you how the tool works.
The Texas Twister Air Hammer Pulling Kit includes:
- 20″ primary drive bar
- 6″ double male extension
- 20″ straight extension
- 7″ seal remover
- 7″ J-hook and reverse hammer
- 7″ universal flat blade puller
- 7″ axle puller/crows foot
- Two 2.5″ double female connectors
- 1/2″-20 thread connectors for use with 5/8″ and 3/4″ slide hammer bits and pullers
- Double male vise grip connector bolt
- Storage case
Summit Racing Equipment
1-800-230-3030